مراحل تصفیه آب دستگاه سافت واتر

Water treatment steps on soft water

۶-step process for water purification soft water

The first phase of the soft water purifier water: filters made of 100% pure polypropylene pressed 5 microns with a transparent shell to remove mud, sand and other suspended contaminants are.
This transparent shell replacement filter simply shows

Secondly, powdery carbon filter carbon used in the filter of coconut shell with a white shell to remove chlorine, trihalomethanes and organic chemicals in insecticides and pesticides, color, taste and smell of water .

Third, carbon block filter carbon used in the filter of Nargylba shell white shell to complete the second stage and remove the chemicals in the water is. The structure of the pores of the filter to remove chlorine and toxic substances is considered the highest. The filter consists of two layers of polypropylene for pre-treatment.

The fourth step, the membrane: membrane performance membrane to remove salts harmful to 0.001 microns in size, including inorganic materials dissolved, dissolved organic matter, microbiological contaminants Qbylandvtvksyn, viruses and bacteria and nitrates and nitrites, and heavy metals such as mercury , arsenic, lead, zinc and others. Membrane of high quality standards NSF, ANSI and remove salts and harmful substances up to 98%.

The fifth step, carbon filter made of coconut shell to improve the taste, smell and taste of the water is.
Since the water storage tank passes through the filter, if the water a long time left in the tank and its taste and smell is changed through the fifth stage filter changes will improve.

The sixth stage, bio-ceramic mineral filter Yellow: to adjust the pH and improve the taste of water.

Technical specifications household water purification soft water

The device is capable of producing 10 liters of water per hour.
Can be installed under the kitchen sink or kitchen wall, according to customer preference.

Minimum temperature: 5 degrees Celsius.

Maximum temperature: 50 degrees Celsius.

Pressure gauge (5/2 “): In order to display and control the water pre-filtration system filters. If the needle pressure of 20 Psi is less need to replace carbon filters, PP and took action.

Or a four-way solenoid valve: when the electricity or water flow is interrupted, the water entering the system is interrupted.

Reservoir tank made of polypropylene, has NSF and FDA standards and stainless steel troughs are.

Fantasy valves: a valve lever with a beautiful design and reliable sealing.

Soft water purifier replacement filters water

Filters steps 1 to 3 depending on the quality of water, during 4 to 6 months should be replaced.
The membrane, if the pre-treatment filters be replaced in a timely manner, usually every 2 years should be replaced
Steps 5 and 6 filters should be replaced every year.